Key Formulation Challenges in Body Wash Products
Formulation Table
| Phase | Ingredient | INCI | Purpose | % |
|---|---|---|---|---|
| A | － | Water | － | 62.00 |
| － | Hydroxyethylcellulose | Thickener | 0.60 | |
| B | NAA®-122 | Lauric Acid | Improves detergency and foam quality | 10.00 |
| NAA®-142 | Myristic Acid | Improves detergency and foam quality | 3.00 | |
| NAA®-160 | Palmitic Acid | Improves detergency and foam quality | 1.00 | |
| C | － | Potassium Hydroxide (48%), Water | Neutralizer | 7.90 |
| D | DIAPON® K-SG | Sodium Taurine Cocoyl Methyltaurate, Water | Improves detergency and foam quality | 4.00 |
| SOFTILT® AS-L | Sodium Lauroyl Methylamino Propionate, Water | Improves detergency and foam quality | 4.00 | |
| ANON BDF-SF | Cocamidopropyl Betaine, Water | Improves detergency and foam quality | 2.00 | |
| E | UNIOX® ST-40E | Solubilizer | 3.00 | |
| － | Macadamia Integrifolia Seed Oil | Moisturizing oil | 0.05 | |
| F | ACROBUTE® 60MB-63 | PPG-28-Buteth-35 | Improves moisturizing efficacy after rinsing off | 2.00 |
Preparation Method
- Weight ingredients for phase A and mix uniformly at R.T.
- Heat to 80℃ and add phase B, then mix uniformly at 80±5℃.
- Add phase C into phase A+B, and mix uniformly at 80±5℃.
- Add phase D into phase A+B+C, and mix uniformly at 80±5℃.
- Add Phase E which is preliminary dispersed.
- Cool to 40℃ or lower and then add the phase F ingredients and stir until evenly mixed.
This formula is result by our best efforts. But, this formula does not guarantee performance, safety, stability, or commercial property rights for your products.
Foamy Body Wash
Formulation Table
| Phase | Ingredient | INCI | Purpose | (wt%) (Enrichment foam) |
(wt%) (Enrichment foam) |
|---|---|---|---|---|---|
| A | － | Water | － | Balance | Balance |
| NONION DL-40HN(W) | PEG-75 Dilaurate, Water | Foam elasticity improver | 3.00 | － | |
| NONION LT-280W | PEG-80 Sorbitan Laurate, Water | Foam elasticity improver | － | 6.00 | |
| DIAPON® K-SG | Sodium Taurine Cocoyl Methyltaurate, Water | Improves detergency and foam quality | 8.00 | 8.00 | |
| SOFTILT® AS-L | Sodium Lauroyl Methylamino Propionate, Water | Improves detergency and foam quality | 3.00 | 3.00 | |
| ANON BDF-SF | Cocamidopropyl Betaine, Water | Improves detergency and foam quality | 6.00 | 6.00 | |
| RG・CO・P | Glycerin | Moisturizer | 10.00 | 10.00 | |
| Preservative | － | Preservative | q.s. | q.s. | |
| － | Citric Acid | pH adjuster | q.s. | q.s. |
pH(Undiluted Solution) 5.5-6.5
Preparation Method
- Stir all phase-A ingredients at 80℃ until dissolve uniformly.
This formula is result by our best efforts. But, this formula does not guarantee performance, safety, stability, or commercial property rights for your products.